Marble is a valuable material. Marble creates a classic look when you use marble in your house. You can use marble for the floor, countertop, or baseboards.Cleaning marble is much more difficult because marble is very sensitive to acidic or alkaline cleaning solutions. Besides, you require special mops, and microfiber cloth for cleaning marble.

Hence, we are here to show you a simple procedure on how to clean marble.  You also get special tips on preventative measures for marble at the end of this article.  So we will recommend you to read from beginning to end carefully.

Equipment & Chemicals

1. Microfiber Scrubbing Mop.

2. Microfiber Flat Mop cut end.

3. Warm water.

4. Mild dishwasher or any cleaning solution with close to neutral PH.

5. Baking soda.

6. Plastic Wrap.

7. Microfiber Cleaning Essentials.

Cleaning Procedure

You may get various techniques for cleaning marble from the internet.  But we provide you with a simple & most effective procedure.

Step 1: Choosing an Appreciate Cleaning AgentMarble is sensitive to acidic or alkaline solutions. An extreme level of PH can make the surface dull. So, selecting a perfect cleaning agent is necessary. We recommend you take any kind of mild dishwasher.

Step 2: Making a Cleaning SolutionAfter choosing the cleaning agent, you need to mix the cleaning agent with warm water. In a bucket of warm water add 5-10 teaspoons of the cleaning agent to make the cleaning solution.

Moreover, you can make a perfect solution for marble cleaning at home.  You only need one ingredient, it is isopropyl alcohol.  Take a spray bottle of 1 liter, put ¼ isopropyl alcohol into the bottle, and fill the bottle with water.  Your magic solution is ready to clean the marble.

Step 3: Conducting CleaningThe cleaning solution is ready. Now take a microfiber flat mop. Then, dip the mop into the solution. Then, squeeze it and apply it to the marble. The grip of this mop is very satisfactory, and you can clean it with this mop very smoothly.

Step 4: Removing StainsIf you observe stains on the marble, you can apply a thick baking soda paste and keep it for 24 hours by wrapping it with plastics. Then, you can use a Microfiber Scrubbing Mop. And it can easily remove stains from marble by scrubbing.

Step 5: DryingWater can create stains on the marble. So drying is very essential after wet cleaning of marble. For drying, you can use Microfiber Cleaning Essentials. These clothes are super absorbent and help to dry the marble rapidly.

Preventative Measures

Avoid using harsh mops.Do not use any cleaning solution that is highly acidic or alkaline.

Protect the marble against sand because sand can make stains on the marble easily.Do not allow water on the marble for more than a minute. 

Try to dry the surface immediately, if water is dropped on the marble.

* The email will not be published on the website.